Spray Nine®
details
HDP 970-40 Severe-Duty Stamping Lubricant
Metal Mates HDP 970-40 is a severe-duty lubricant for stamping, forming, drawing, piercing, punching, and flanging of heavy gauge steel, ultra high strength steel, or stainless steel.
This semi-synthetic lubricant combines extreme pressure, barrier, and anti-wear additives in a formulation that is ideal for difficult forming, stamping, and drawing operations. HDP offers all the advantages of soluble oils and synthetics without their disadvantages in heavy-duty applications. Provides excellent physical and chemical lubricity without leaving a heavy oil residue (unlike soluble oils and synthetics). Won’t turn sticky or gummy on parts and dies.
Easy clean-up with no pre-weld wash needed. Recommended for use with 0.200" - 0.330" thick cold-rolled, electro-galvanized (galvanneal), hot-dip galvanized, stainless, high-strength steel (HSS), and ultra-high-strength steels (UHSS). Can be diluted for use with materials down to 0.035"
FEATURES
- No cleaning required before welding
- Improves die life
- Excellent rust protection
- Reduces scoring and cracking on UHSS & other materials
- No sticky residue
- Won’t build up on dies
- Cleaner, safer work environment
APPLICATIONS
|
Packaging Details
| Part No. US | Net Contents | Container Type | Units/Case | Color |
|---|---|---|---|---|
| MM3002 | 5 gal | pail | 1 | creamy tan |
| MM3003 | 55 gal | drum | 1 | creamy tan |
| MM3006 | 330 gal | tote | 1 | creamy tan |
Search for discontinued products in the SDS Finder
Properties
| Appearance / Physical State | liquid |
| Odor | mild odor |
| pH Value | 7.7-8.7 |
| Specific Gravity | 1.03 |
| Flash Point | >200F (>93C) |
| Boiling Point / Range | 212F (100C) |
| Vapor Density | Heavier than air |
| Refractometer Readings | 6-10 RI |
| Prop 65 Warning | No |
| Vapor Pressure | <1 |
| Dilution Ratio | Typical Dilution: 3:1 to 6:1 (33-17%) |
| Total Chlorine | Y |
